Turbocharger Coolant Supply Tube: Installation
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
- Install and connect the turbocharger coolant supply tube and the hose clamp. Attach the turbocharger coolant supply tube to the tube retainers. Use the General Equipment: Hose Clamp Remover/Installer
- Attach the turbocharger coolant supply tube to the tube retainer. Connect the turbocharger coolant supply tube and the hose clamp. Use the General Equipment: Hose Clamp Remover/Installer
- If removed, install the underbody shield.
Torque: 13 lb.in (1.5 Nm)
- Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .