Pinpoint Test(s): Notes
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
Engine Does Not Crank
Refer to Starting System for schematic and connector information.
Normal Operation and Fault Conditions
Refer to: Starting System - Overview .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P06E9 | Engine Starter Performance | No engine rotation detected during crank event |
Possible Sources
- Battery
- Battery cables
- IPC
- Starter motor
- BJB starter relay
Visual Inspection and Diagnostic Pre-checks
- Inspect the Run/start relay.
- Inspect the high current BJB connections.
- Verify the BJB fuse 36 (30A).
- Verify the BCM fuse 4 (10A).
- Inspect the Integrated Keyhead Transmitter (IKT).