LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Passive Anti-Theft System (Pats) - Vehicles With: Keyless Entry And Push Button Start) >> Description And Operation >> Passive Anti-Theft System (PATS) - System Operation and Component Description >> Network Message Chart >> Module Network Input Messages - IPC

Module Network Input Messages - IPC

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
Broadcast Message Originating Module Message Purpose
Ignition status BCM Used by the IPC to power up when the START/STOP button is pressed and a programmed key is detected within the vehicle or to power down when the request is to turn the vehicle off.
Vehicle mode BCM Used by the IPC to display "No Key Detected" when the START/STOP button is pressed and no programmed key is detected within the vehicle.