LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Cruise Control) >> Diagnosis And Testing >> Cruise Control >> Pinpoint Tests >> Pinpoint Test A : Cruise Control Is Inoperative >> Notes

Pinpoint Test A : Cruise Control Is Inoperative: Notes

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

Refer to CRUISE CONTROL for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Steering Wheel and Column Electrical Components - System Operation and Component Description .

REFER to: Cruise Control - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Condition
SCCM B137F:11 Steering Wheel Left Switch Pack: Circuit Short To Ground A continuous and on-demand DTC sets when the cruise control switches are shorted to ground.
SCCM B137F:13 Steering Wheel Left Switch Pack: Circuit Open A continuous and on-demand DTC sets when the cruise control switches are open circuit.
SCCM B137F:4A Steering Wheel Left Switch Pack: Incorrect Component Installed A continuous memory DTC that sets when the SCCM detects a switch is installed that does not correspond with the switch configuration in the module.
SCCM B137F:96 Steering Wheel Left Switch Pack: Component Internal Failure A continuous and on-demand DTC that sets when one or more of the cruise control switches are stuck.
SCCM B137F:9E Steering Wheel Left Switch Pack: Stuck On A continuous memory DTC that sets when a cruise control switch is stuck in position.

Possible Sources