Pinpoint Test J : One Or More Rear Window Wiper Modes Are Inoperative: Notes
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
Refer to WIPERS AND WASHERS for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Wipers and Washers - System Operation and Component Description .
Possible Sources
- Fuse
- Wiring, terminals or connectors
- Wiper/washer switch
- Rear window wiper motor
- Windshield wiper motor
- SCCM
Visual Inspection and Pre-checks
- Inspect BJB fuse 16 (10A) and make sure it is OK.
- Inspect the wiper/washer switch for damage.
NOTE:
Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.