LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Information Center - Instrumentation, Message Center And Warning Chimes (1 Of 2)) >> Description And Operation >> Instrument Panel Cluster (IPC) - System Operation and Component Description >> Dealer Test Mode

Dealer Test Mode

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

To enter the IPC dealer test mode, begin with the ignition in OFF. Press and hold the LH steering wheel switch OK button. Place the ignition in ON and hold the button until the display indicates Test or Gauge Sweep, usually within 3-5 seconds. Press the up or down arrow buttons to navigate through each of the display windows. To exit the IPC dealer test mode, press and hold the OK button for 5 seconds or place the ignition in OFF. Each button press advances the viewing window to the next set of items.

scientia non olet · About LEMON Manuals