LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Body Closures) >> Removal And Installation >> Hood Hinge >> Removal

Hood Hinge: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: LH side shown, RH side similar.
  1. Remove the hood. Refer to: Hood .
  2. Remove the bolts and the hood hinge.

    Torque: 133 lb.in (15 Nm)

GFD328687Courtesy of FORD MOTOR COMPANY