LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Rear Drive Axle Differential) >> Removal And Installation >> Axle Assembly >> Installation

Axle Assembly: Installation

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If replacing the axle assembly, the 4X4 control module will need to be reconfigured with the new Active Torque Coupling (ATC) bar code information. If the new bar code information does not match the existing 4X4 control module information, driveline damage or driveability concerns can occur.

    If installing a new RDU, re-configure the Active Torque Coupling (ATC). Refer to: Four-Wheel Drive Systems - Overview .

  2. To install, reverse the removal procedure.
  3. Fill the differential fluid. Refer to: Differential Draining and Filling .
scientia non olet · About LEMON Manuals