LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Abs Guided Routine Testing) >> Pinpoint Tests >> Pinpoint Tests AQ: Cruise Control Braking Fault >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, and 2018 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

The CCM communicates acceleration and braking request data with the ABS module over the CAN. 

PPT AQ ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U2107:68 Collision Mitigation By Braking: Event Information Sets when the ABS module detects the vehicle deceleration is implausibly high when compared to the vehicle deceleration requested by the CCM. This is most likely caused by an abrupt stop of the vehicle due to a collision, an extreme driving situation, a mechanical or electrical failure of the cruise control system or an internal failure of the ABS module.