LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Abs Guided Routine Testing) >> Pinpoint Tests >> Pinpoint Tests AP: ABS Overheat Concern With CCM >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, and 2018 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

The ABS module monitors various inputs and compares the values to what should be expected. If the values received are out of range or not what should be expected, the ABS module sets a DTC. 

PPT AP ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
C0072:68 Brake Temperature Too High: Event Information Sets when the ABS module a hard reset (battery disconnected or ignition ON with ABS module disconnected), HSCAN or CCM concerns. The ABS module disables adaptive cruise control until the temperature is returned to normal. The DTC does not illuminate any warning indicators but the message center displays ADAPTIVE CRUISE CONTROL NOT AVAILABLE.