LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Abs Guided Routine Testing) >> Pinpoint Tests >> Pinpoint Tests AA: Steering Angle Reset DTC >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, and 2018 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

The monitors the steering wheel angle from an integrated sensor and compares that to data received by other modules. If a discrepancy is detected the SASM sets a DTC. 

PPT AA SASM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
C1B00:85 Steering Angle Sensor: Signal Above Allowable Range Sets when the SASM detects the steering wheel angle does not match the actual steering angle of the front wheels.
scientia non olet · About LEMON Manuals