LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Abs Guided Routine Testing) >> DTC/Symptom Selection >> DTC Index >> ABS - Antilock braking system >> DTC C1137: Reverse Gear Switch

DTC C1137: Reverse Gear Switch

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, and 2018 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
Failure Action
29 This DTC sets when the ABS module receives an "invalid" message from the PCM instead of the actual current transmission gear. RETRIEVE and REPAIR all non-network DTCs in the PCM. REFER to the Diagnosis and Testing in the applicable Electronic Engine Controls article
64 This DTC sets when the when the reverse gear message sent from the PCM indicates the transmission is in REVERSE when other stability control inputs received by the ABS module indicate the vehicle is moving forward. RETRIEVE and REPAIR all non-network DTCs in the PCM. REFER to the Diagnosis and Testing in the applicable Electronic Engine Controls article