Wheel Knuckle Bushing: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM Color Coding

NOTE: Removal steps in this procedure may contain installation details.

Remove the wheel knuckle. Refer to: Wheel Knuckle - Vehicles With: Rear Drum Brakes .
Remove the camber adjustment retainer and wheel knuckle mounting bracket.
Torque: Stage 1: 177 lb.in (20 Nm) Stage 2: 76 lb.ft (103 Nm)

Courtesy of FORD MOTOR COMPANY
Remove the rubber stopper.

Courtesy of FORD MOTOR COMPANY
ESST-204-352 Remove the wheel knuckle bush.

Courtesy of FORD MOTOR COMPANY