Section 61 (Suspension System - General Information): Specifications

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

General Specifications

Item	Specification
Ball Joint Deflection
Lower	0-0.2 mm (0-0.008 in)
Front Ride Height
AWD vehicles	53.3 mm (2.098 in) +/- 12 mm (0.472 in)
FWD vehicles	33.6 mm (1.322 in) +/- 12 mm (0.472 in)
Rear Ride Height
AWD vehicles	119.8 mm (4.71 in) +/- 12 mm (0.472 in)
FWD vehicles	118.2 mm (4.65 in) +/- 12 mm (0.472 in)
Side-to-Side Lean (All Vehicles)
Front	0 mm (0 in) +/- 7.5 mm (0.295 in)
Rear	0 mm (0 in) +/- 7.5 mm (0.295 in)

Alignment Specifications

NOTE: All alignment specifications are with the vehicle fuel tank full.

Item

Total / Split

Front

AWD vehicles

Camber

-0.69 deg. +/- 0.75 deg.

0.0 deg. +/- 0.75 deg.

Caster

5.39 deg. +/- 0.75 deg.

0.0 deg. +/- 0.75 deg.

Toe @ curb ride height (positive value is toe in, negative value is toe out)

0.08 deg. +/- 0.20 deg.

FWD vehicles

Camber

-0.96 deg. +/- 0.75 deg.

0.0 deg. +/- 0.75 deg.

Caster

5.66 deg. +/- 0.75 deg.

0.0 deg. +/- 0.75 deg.

Toe @ curb ride height (positive value is toe in, negative value is toe out)

0.16 deg. +/- 0.20 deg.

Rear

Camber AWD vehicles

-0.57 deg. +/- 0.75 deg.

Camber FWD vehicles

-1.64 deg. +/- 0.0 deg.

Thrust angle FWD and AWD vehicles

0.0 deg.

0.0 deg. +/- 0.50 deg.

Toe @ curb ride height (positive value is toe in, negative value is toe out) AWD vehicles

+0.04 deg. +/- 0.20 deg.

+0.08 deg. +/- 0.20 deg.

Toe @ curb ride height (positive value is toe in, negative value is toe out) FWD vehicles

+0.31 deg. +/- 0.00 deg.

⁽¹⁾	Nominal setting (reference only) no adjustment.