Roof Opening Panel - Overview
Overview
The roof opening panel consists of the following:
- Air deflector
- Roof opening panel frame
- Roof opening panel glass
- Roof opening panel motor
- Roof opening panel shield
- Roof opening panel drain hoses
- Roof opening panel control switch
- Trough assembly
The roof opening panel motor must be initialized when repairs are carried out on the roof opening panel system, including: any time the roof opening panel motor has been removed, the roof opening panel glass has been removed or adjusted, or if the roof opening panel frame has been removed. Refer to: Power Roof Opening Panel Initialization .
The accessory delay relay, located in the BCM, that provides voltage for the operation of the power windows and the roof opening panel. Refer to: Glass, Frames and Mechanisms .
The roof opening panel is an electronically operated glass panel with a one-touch open feature. The roof opening panel assembly uses an integrated module and motor to operate the roof opening panel.