DTC U0413: Invalid Data Received From Battery Energy Control Module "B": Description

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2019 Ford Expedition, 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, and 2018 Ford Transit-250. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This DTC is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new acronym>RCM as part of the repair unless directed to do so in a pinpoint test.

Failure	Action
00	CHECK for additional RCM and BECMB (extended power module) DTCs. DIAGNOSE and REPAIR any DTCs that are retrieved. For RCM DTCs, REFER to the RCM - Restraint Control Module . To diagnose BECMB DTCs, REFER to the BECMB - Extended Power Module .
56	Go to PINPOINT TEST BF
92	This DTC indicates that there is a BECMB fault present. CARRY OUT a self-test for the BECMB. DIAGNOSE and REPAIR the BECMB DTCs. REFER to the BECMB - Extended Power Module .