DTC B00C0: Passenger Seat Occupant Classification Sensor "A"
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2019 Ford Expedition, 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, and 2018 Ford Transit-250. However, it is still accessible from the selected car via links, so may be relevant.
| Failure | Action |
|---|---|
| 11 | Inspect the OCS for any damage and for correct installation. If any damage is found, REPAIR the root cause of the damage and INSTALL a new OCS component as necessary. If any installation concerns are found, CORRECT the OCS installation, referring to the OCS Removal and Installation procedure as needed in the service information as needed to make sure the sensor hose is free from kinks and correctly routed. If no damage or installation concerns are found, INSTALL a new OCS. REFER to: Supplemental Restraint System article |
| 12 | INSTALL a new OCS sensor. REFER to the appropriate Removal and Installation procedure in Supplemental Restraint System article |
| 16 | INSTALL a new OCS sensor. REFER to the appropriate Removal and Installation procedure in Supplemental Restraint System article |
| 49 | INSTALL a new OCS sensor. REFER to the appropriate Removal and Installation procedure in Supplemental Restraint System article |
| 7B | Inspect the OCS for any damage and for correct installation. If any damage is found, REPAIR the root cause of the damage and INSTALL a new OCS component as necessary. If any installation concerns are found, CORRECT the OCS installation, referring to the OCS Removal and Installation procedure as needed in the service information as needed to make sure the sensor hose is free from kinks and correctly routed. |