LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine - 2.0L DURATEC-He (129KW/175PS)) >> Removal And Installation >> Variable Camshaft Timing (VCT) Unit >> Removal

Variable Camshaft Timing (VCT) Unit: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.
  1. Remove the timing chain. Refer to: Timing Chain .
  2. Remove the bolts and VCT units.
GFD325636Courtesy of FORD MOTOR COMPANY