Oil Pump Drive Belt - 6-Speed Automatic Transmission 6F15: Installation

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

1. Using a suitable tool, rotate the oil pump belt tensioner.
2. Install the oil pump belt.
Courtesy of FORD MOTOR COMPANY
Install the oil pump gear.
- Install new bolts.
  Torque 26 lb.ft (35 Nm)
Courtesy of FORD MOTOR COMPANY
Remove the 4 mm drill bit. Use the General Equipment: 4 mm Drill Bit

Courtesy of FORD MOTOR COMPANY
Install the timing belt sprocket.

Courtesy of FORD MOTOR COMPANY
Install the timing belt. Refer to: Timing Belt .
NOTE: Make sure that the component is correctly installed.

Install the oil pump cover.

Courtesy of FORD MOTOR COMPANY
Install the oil pan. Refer to: Oil Pan .