LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Automatic Transmission - 6-Speed Automatic Transmission - 6F35 (2 Of 2)) >> Removal And Installation >> Selector Shaft Seal >> Installation

Selector Shaft Seal: Installation

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install the new selector shaft seal. Use Special Service Tool: 307-581 Manual lever seal installer.
    GFD326763Courtesy of FORD MOTOR COMPANY
  2. Install the TR sensor. Refer to: Transmission Range (TR) Sensor .
scientia non olet · About LEMON Manuals