LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (RCM Guided Routine Testing -- (Pinpoint Tests K - ZB)) >> Pinpoint Tests >> Pinpoint Tests XB: Driver Door and Right C-Pillar Side Impact Sensor (including Component Internal Failure) >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2019 Ford Expedition, 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, and 2018 Ford Transit-250. However, it is still accessible from the selected car via links, so may be relevant.

The RCM monitors the driver door and the second row right side impact sensors and circuits for the following faults: 

NOTE: The second row right side impact sensor also known as the right C-pillar side impact sensor.

If a fault is detected, the RCM stores DTC B1414:11, B1414:12, B1414:13, B1414:96, B1419:11, B1419:12, B1419:13 or B1419:96 in memory and sends a message to the IPC to illuminate the airbag warning indicator.

The RCM communicates with each impact sensor. If the RCM is unable to communicate with the sensor, a DTC is stored in memory. A CMDTC no operation (failure type: 93) can be set by a short to voltage on the return circuit of the impact sensor.

When the feed circuit of either impact sensor is shorted to voltage, an invalid data received fault (failure type:81) may also be present for both sensors.

PPT X RCM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
B1414:11 Driver Side Restraints Sensor 1: Circuit Short to Ground Sets when the RCM senses a shorted driver door side impact sensor, a shorted right C-pillar side impact sensor, a short to ground from the driver door side impact sensor feed circuit or a short to ground from the right C-pillar side impact sensor feed circuit.
B1414:81 Driver Side Restraints Sensor 1: Invalid Serial Data Received Sets when the RCM senses a faulted driver door side impact sensor or an open driver door side impact sensor circuit.
B1414:93 Driver Side Restraints Sensor 1: No Operation Sets when the RCM senses a faulted right C-pillar side impact sensor or driver door side impact sensor, or a short to voltage from the feed or return circuit of the right C- pillar side impact sensor or driver door side impact sensor.
B1419:81 Passenger Side Restraints Sensor 2: Invalid Serial Data Received Sets when the RCM senses a faulted right C-pillar side impact sensor or an open right C-pillar side impact sensor circuit.