Normal Operation and Fault Conditions
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2019 Ford Expedition, 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, and 2018 Ford Transit-250. However, it is still accessible from the selected car via links, so may be relevant.
The RCM continuously monitors the driver seat track position sensor circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Current out of range
- Faulted driver seat track position sensor
If a fault is detected, the RCM stores DTC B00B5:11, B00B5:12, B00B5:13 or B00B5:1D in memory and sends a message to the IPC to illuminate the airbag warning indicator.
PPT M RCM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B00B5:11 | Driver Seat Track Position Restraints Sensor: Circuit Short to Ground | Sets when the RCM senses a short to ground from the driver seat track position sensor circuit for more than 6 seconds. |
| B00B5:12 | Driver Seat Track Position Restraints Sensor: Circuit Short to Battery | Sets when the RCM senses a short to voltage from the driver seat track position sensor circuit for more than 6 seconds. |
| B00B5:13 | Driver Seat Track Position Restraints Sensor: Circuit Open | Sets when the RCM senses an open from either driver seat track position sensor circuit for more than 6 seconds. |
| B00B5:1D | Driver Seat Track Position Restraints Sensor: Circuit Current Out of Range | Sets when the RCM measures current outside of an acceptable range from the driver seat track position sensor circuit for more than 6 seconds. |