Front Stabilizer Bar Bushing: Removal
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.
-
NOTE: Removal steps in this procedure may contain installation details.
Remove the front stabilizer bar. Refer to: Front Stabilizer Bar .
-
NOTE: Note the position of the component before removal.
On both sides. Remove the stabilizer bar bushing bracket and bushing.