Pinpoint Test D : The Hazard Lamp Function Is Inoperative Or Always On: Notes
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
Refer to TURN SIGNAL/STOP/HAZARD LAMPS for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Exterior Lighting - System Operation and Component Description .
REFER to: Exterior Lighting - Overview .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| BCM B1D35:11 | Hazard Switch: Circuit Short To Ground | A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the hazard lamp function input circuit. |
Possible Sources
- Wiring, terminals or connectors
- Hazard flasher switch
- BCM