Pinpoint Test D : One Or Both High Beams Are On Continuously: Notes
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
Refer to HEADLAMPS/AUTOLAMPS for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Exterior Lighting - System Operation and Component Description .
REFER to: Exterior Lighting - Overview .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| BCM B1D02:15 | Left High Beam Circuit: Circuit Short To Battery Or Open | A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the LH high beam output circuit. |
| BCM B1D03:15 | Right High Beam Circuit: Circuit Short To Battery Or Open | A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the RH high beam output circuit. |
Possible Sources
- Wiring, terminals or connectors
- LH steering column multifunction switch
- SCCM
- BCM
Visual Inspection and Pre-checks
- Inspect the LH steering column multifunction switch for damage.