LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Steering Wheel And Column Electrical Components) >> Removal And Installation >> Steering Wheel Multifunction Switch >> Removal

Steering Wheel Multifunction Switch: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: LH steering wheel multifunction switch shown, RH switch similar.
  1. Remove the driver airbag. Refer to: Driver Airbag .
  2. Disconnect the steering wheel multifunction switch electrical connector.
    GFD324719Courtesy of FORD MOTOR COMPANY
  3. Remove the retainers and remove the steering wheel multifunction switch.
GFD324720Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals