LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Side And Rear Vision) >> Diagnosis And Testing >> Blind Spot Information System >> Pinpoint Tests >> Pinpoint Test H : DTC (Diagnostic Trouble Code) U0146:00 >> Notes

Pinpoint Test H : DTC (Diagnostic Trouble Code) U0146:00: Notes

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.

Normal Operation and Fault Conditions 

The SODL and SODR communicate with the GWM through the MS-CAN.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Condition
SODL U0146:00 Lost Communication With Serial Data Gateway "A": No Sub Type Information A continuous memory DTC that sets in the SODL and SODR when messages received through the GWM are missing for 3 seconds or more.A continuous memory DTC that sets in the SODL and SODR when messages received through the GWM are missing for 3 seconds or more.

Possible Sources