LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Electronic Engine Controls - 2.0L DURATEC-He (129KW/175PS)) >> Removal And Installation >> Mass Air Flow (MAF) Sensor >> Removal

Mass Air Flow (MAF) Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
    1. Disconnect and remove the MAF sensor.

      Torque

      : 18 lb.in (2 Nm)

GFD326593Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals