LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Electronic Engine Controls - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Intake Air Temperature (IAT) Sensor >> Removal

Intake Air Temperature (IAT) Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the electrical connector from the IAT sensor
    GFD326511Courtesy of FORD MOTOR COMPANY
  2. Remove the IAT sensor.
GFD326512Courtesy of FORD MOTOR COMPANY