Rear Parking Aid Sensor: Installation
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear parking aid sensor(s).
- Connect the rear parking aid sensor electrical connector(s).
- Install the rear bumper cover. Refer to: Rear Bumper Cover .
- Carry out the azimuth and elevation system checks. Refer to: Azimuth System Check . Refer to: Elevation System Check .
- If any sensor fails a system check, diagnose the rear parking aid system. Refer to: Parking Aid .