LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (MULTIFUNCTION Electronic Modules) >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test A : B1430:12, B1430:14, B1435:12, B1435:14 >> Notes

Pinpoint Test A : B1430:12, B1430:14, B1435:12, B1435:14: Notes

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

Refer to HORN/CIGAR LIGHTER for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Module Controlled Functions - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Condition
BCM B1430:12 Power Point Relay Reset Output: Circuit Short To Battery A continuous and on-demand DTC that sets when the BCM detects a short to voltage on the power point relay coil circuit.
BCM B1430:14 Power Point Relay Reset Output: Circuit Short To Ground Or Open A continuous and on-demand DTC that sets when the BCM detects a short to ground or open on the power point relay coil circuit.
BCM B1435:12 Power Point Relay Set Output: Circuit Short To Battery A continuous and on-demand DTC that sets when the BCM detects a short to voltage on the power point relay coil circuit.
BCM B1435:14 Power Point Relay Set Output: Circuit Short To Ground Or Open A continuous and on-demand DTC that sets when the BCM detects a short to ground or open on the power point relay coil circuit.

Possible Sources