LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Rear Seats) >> Removal And Installation >> Rear Seat Cushion Cover >> Removal

Rear Seat Cushion Cover: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: 40 percent rear seat shown, 60 percent similar.
  1. Remove the rear seat cushion. Refer to: Rear Seat Cushion .
  2. Detach the J-clips and remove the rear seat cushion cover and foam as an assembly.
    GFD329001Courtesy of FORD MOTOR COMPANY
  3. NOTE: Follow the unique instructions or graphics for this step in installation.

    Remove the rear seat cushion cover.

    1. Invert the rear seat cushion cover.
    2. Remove the hog rings.

GFD329002Courtesy of FORD MOTOR COMPANY