LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Rear Seats) >> Removal And Installation >> Rear Head Restraint Guide Sleeve >> Removal

Rear Head Restraint Guide Sleeve: Removal

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: 40 percent rear seat backrest shown, 60 percent similar.
  1. Raise the rear seat head restraint.
    GFD328978Courtesy of FORD MOTOR COMPANY
  2. Remove the rear seat head restraint.

    1. Depress the rear seat head restraint release button.
    2. Remove the rear seat head restraint.

    GFD328979Courtesy of FORD MOTOR COMPANY
  3. NOTE: Follow the unique instructions or graphics for this step in installation.

    Release the locking tab, remove the rear seat head restraint guide sleeve(s). Use the General Equipment: Flat Headed Screw Driver

GFD328980Courtesy of FORD MOTOR COMPANY