Functional Test - Seatbelt Retractor, Road Test Inspection

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: WARNING: The driver and passenger must be prepared to brace themselves in the event the seatbelt retractor does not lock. Failure to follow this instruction may result in serious personal injury.

NOTE: Make sure there is no excessive slack in the seatbelt webbing across the torso during testing.

NOTE: Do not jerk on the seatbelt webbing when carrying out this test.

Fasten the seatbelts and proceed to a safe area.
Reach a speed of 24 kmh (14.9 mph).
WARNING: WARNING: Apply maximum brake force only on dry concrete or equivalent hard surface, never on wet pavement or gravel. Failure to follow this instruction may result in serious personal injury.
Grasp the shoulder harness, lean forward and apply the brakes, making a maximum braking application without a skid.
The seatbelts should lock up with minimum webbing extension.
If there is a lockup of all seatbelt retractors being tested, the seatbelt retractors are functioning correctly. If any seatbelt retractor fails to lock up, install a new seatbelt retractor(s).