LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Exterior Trim And Ornamentation) >> Removal And Installation >> D-Pillar Moulding >> Installation

D-Pillar Moulding: Installation

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure that a new component is installed.

    Install the D-pillar moulding.

    Torque: 15 lb.in (1.7 Nm)

    GFD328807Courtesy of FORD MOTOR COMPANY
  2. Carefully close the liftgate.
GFD328808Courtesy of FORD MOTOR COMPANY