Network Message Chart
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
BCM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Camera status | IPC | Used to command the visual park aid alert, static guidelines, active guidelines and zoom level. |
| Gear lever position | PCM | Used to enable the rear parking aid camera display when reverse gear is selected. |
| Parking aid range to object | PAM | Used to highlight the zone on the video image where an object has been detected by the rear parking aid system. |
| Steering pinion angle | PSCM | Used to generate the active guidelines on the video display (if equipped with active guidelines). |
| Trailer lamp connection | TRM | Used to disable the fixed and active guidelines when a trailer is attached to the vehicle. |
| Vehicle speed | PCM | Used to support the rear parking aid camera delay feature. |