LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Parking Aid - Vehicles With: Parking Aid Camera) >> Description And Operation >> Parking Aid - System Operation and Component Description >> Component Description >> BCM

Component Description: BCM

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The BCM settings and configuration have no influence over the video signal from the rear parking aid camera. The rear parking aid camera provides a video signal any time it receives voltage and ground.

The BCM serves as a gateway module between the rear parking aid camera and other modules on the HS-CAN1, HS-CAN2 and MS-CAN. It communicates with the rear parking aid camera via the LIN and stores Diagnostic Trouble Codes (DTCs) for the rear parking aid camera and the LIN in the event of a concern.

The BCM requires PMI when replaced. Refer to: Module Configuration - System Operation and Component Description .

scientia non olet · About LEMON Manuals