Rear Door Window Control Switch: Removal
WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Release the clips and the tabs and remove the rear door armrest side trim panel. Use the General Equipment: Interior Trim Remover
- Remove the rear door trim panel screws.
- Remove the rear door window control switch and bezel as an assembly.
- Release the clips.
- Disconnect the electrical connector.
-
NOTE: This step is only necessary when installing a new component.
Remove the rear door window control switch.
- Release the rear door window control switch retaining clips.
- Remove the rear door window control switch from the bezel.