Power Window Operation

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.

Standard power window features include one-touch up/down operation for the driver door window when the master window control switch is momentarily pressed to the second detent and released.

The master window control switch may be used to raise or lower all door windows. The individual door windows can also be operated from each of the corresponding door window control switches.

NOTE: If the vehicle battery is disconnected, the one-touch up and one-touch down feature (and obstacle detection) is disabled prior to initialization.

NOTE: A de-initialized window does not operate in one-touch up mode until it has been initialized.

Refer to: Power Door Window Initialization .

If an obstacle is detected in the window opening as the window glass is moving upward, the window motor automatically reverses direction until the window glass is slightly below where the obstruction occurred and then stops moving. The window motors have a security override feature. Once the window motor stops the glass after an obstacle has been detected, and within 2 seconds the switch is released, then held in the auto UP position, the window motor moves the glass up with no obstacle detection (security override). Obstacle detection is reactivated the next time the window is operated upward.