LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Bumpers) >> Removal And Installation >> Front Bumper Cover >> Installation

Front Bumper Cover: Installation

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front bumper cover and tighten the bolts in sequence shown.

    Torque: 48 lb.in (5.4 Nm)

    GFD329279Courtesy of FORD MOTOR COMPANY
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals