LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Bumpers) >> Disassembly And Assembly >> Rear Bumper Cover >> Assembly

Rear Bumper Cover: Assembly

WARNING: This page is about a different car, the 2018 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
  1. To assemble, reverse the disassembly procedure.

    Vehicles equipped with rear parking aid sensors 

  2. Carry out the azimuth and elevation system checks. Refer to: Azimuth System Check . Refer to: Elevation System Check .
  3. If any sensor fails the check, diagnose the sensor fault. Refer to: Parking Aid .
scientia non olet · About LEMON Manuals