Passive Anti-Theft System (PATS) Parameter Reset

For information on Ford Color Coded Illustrations refer to OEM Color Coding

1. Turn the key from OFF to RUN.
2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS on-screen instructions to enter PATS security access.
3. NOTE: If the BCM was replaced, at least 2 keys must be programmed to the BCM. After completing step 3, leave the scan tool connected and REFER to Erase All Keys and Program Two Keys .

   From the scan tool, select "Parameter Reset" and follow the IDS on-screen instructions.