LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel And Interior Switches Illumination >> Diagnosis And Testing >> Instrument Cluster and Panel Illumination >> Pinpoint Tests >> Notes

Pinpoint Tests: Notes

Diagnostic Overview 

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods for information about these practices.

Refer to OEM Wiring Diagrams , Cluster and Panel Illumination for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to Instrument Cluster and Panel Illumination .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1124:09 Lamp Fade Control: Component Failure Sets when the SCCM detects a short to ground from the instrument panel dimmer switch up/down input or dome lamp request input circuits.

Possible Sources 

scientia non olet · About LEMON Manuals