Glass, Frames and Mechanisms: Overview

The accessory delay relay, located in the BCM, provides voltage for the operation of the power windows and the roof opening panel (if equipped). Refer to Delayed Accessory Power below.

Standard power window features include:

SE, SEL 

• One-touch up and one-touch down (LH front window only)

SHO, Limited 

• One-touch up and one-touch down (LH and RH front windows only)

All Vehicles 

The window control switch:

• can be used to manually raise or lower all windows from the master window control switch or the individual side window from the corresponding individual door switch.
• can automatically lower/raise the LH or RH front windows (SHO, Limited) when the corresponding front window control switch is momentarily pressed/pulled to the second detent position and released.
• has a passenger rear window lock-out feature.

Rear Window Defrost 

The HVAC module controls the rear window defrost relay (located in the BJB). The HVAC module activates the rear window defrost relay when the rear window defrost switch (integral to the FCIM) is pressed. If equipped, the rear window defrost can also be activated/deactivated by using a touchscreen interface or voice commands. When the rear window defrost relay is active, the rear window defrost grid is energized.