LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus Limited, FWD, Gas >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seating (Diagnosis & Testing - Disassembly & Assembly) >> Removal And Installation >> Seat Backrest - Front >> Installation

Seat Backrest - Front: Installation

  1. Tighten the 4 recliner-to-seat track bolts.

    1. Tighten the rear outboard bolt to 48 Nm (35 lb-ft).
    2. Tighten the rear inboard bolt to 48 Nm (35 lb-ft).
    3. Tighten the front inboard bolt to 48 Nm (35 lb-ft).
    4. Tighten the front outboard bolt to 48 Nm (35 lb-ft).

GFD343295Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals