LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Cooling - 5.2L 32V Ti-VCT) >> Removal And Installation >> Thermostat Housing >> Installation

Thermostat Housing: Installation

WARNING: This page is about a different variant/trim than selected.
    • Install a new thermostat housing gasket.

    • To install, reverse the removal procedure.

  2. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals