LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Manual Transmission - 6-Speed Manual Transmission - 3160) >> Removal And Installation >> Output Shaft Seal >> Removal

Output Shaft Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the output shaft flange. Refer to: Transmission Output Shaft Flange .
  2. Remove and discard the output shaft seal.
GFD288376Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals