LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Electronic Engine Controls - 5.2L 32V Ti-VCT) >> Removal And Installation >> Clutch Pedal Position (CPP) Switch >> Removal

Clutch Pedal Position (CPP) Switch: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the electrical connector and remove CPP switch from the bracket.
GFD287233Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals