LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine - 2.3L ECOBOOST (231KW/314PS)) >> Removal And Installation >> Variable Camshaft Timing (VCT) Unit >> Removal

Variable Camshaft Timing (VCT) Unit: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: During engine repair procedures, cleanliness is extremely important. All parts must be thoroughly cleaned and any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. Remove the timing chain. Refer to: Timing Chain .
  2. Remove the bolts and the VCT units.
GFD285427Courtesy of FORD MOTOR COMPANY