LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - 2.3L ECOBOOST (231KW/314PS)) >> Removal And Installation >> Fuel Pressure Sensor >> Removal

Fuel Pressure Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Release the fuel system pressure. Refer to: Fuel System Pressure Release .
  2. Disconnect the fuel pressure sensor electrical connector and remove the fuel pressure sensor.

    Torque

    : 22 lb.ft (30 Nm)

GFD287265Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals